Dyno

From Saker
Revision as of 01:16, 3 May 2012 by Ed (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

The purpose of the dyno is to have a lab environment for testing motor control changes.

Motor info

Motor info, including the built in encoder, can be found at the Shire Electrical Conversion

kiWiAC #010

At an estimated 17 degC, the motor temperature circuit reported 440Hz - which, if the error was due solely to the oscillator capacitor, it would be out by around 3.5%. The default calibration would report 30degC