LATA Switch
Jump to navigation
Jump to search
[[Image:LATA_protocol_small.jpg|]]
---
See also USB<->CAN documentation here: http://www.mictronics.de/projects/usb-can-bus/
Key info from this doc is:
TiiiiiiiiLDDDDDDDDDDDDDDDD[CR]
This command transmits an extended 29 Bit CAN frame. It works only if controller is in operational mode after command “O”.
- iiiiiiii Identifier in hexadecimal (00000000-1FFFFFFF) i.e. 100000BD in our example above
- L Data length code (0-8) i.e. 2 in example above
- DD Data byte value in hexadecimal (00-FF). Number of given data bytes will be checked against given data length code. e.g. 64 hex = 100% (i.e. on) and 00 hex is 0% (i.e. off) in our example above
Return: [CR] or [BEL]
---