Difference between revisions of "Shire Electrical Conversion"

From Saker
Jump to navigationJump to search
(Imported from TWiki by twiki2mediawiki.py)
(Imported from TWiki by twiki2mediawiki.py)
Line 14: Line 14:
 
Good explanation of contactors and precharge circuit: http://liionbms.com/php/precharge.php
 
Good explanation of contactors and precharge circuit: http://liionbms.com/php/precharge.php
  
A good discussion on the subject: http://www.diyelectriccar.com/forums/showthread.php/gigavac-contactor-faultyi-23236.html
+
A poor discussion on the subject: http://www.diyelectriccar.com/forums/showthread.php/gigavac-contactor-faultyi-23236.html Off the top of my head, it is suggested that these rules be broken at various points in the discussion
 +
* Do use the correct suppression system for your contactor -- make sure it turns on and off fast enough, make sure not to blow up the circuit driving the contactor
 +
* Do use a precharge resistor capable of continuous operation
 +
* Don't apply power to the controller all the time through the precharge resistor
 +
* Do use an appropriately rated precharge contactor
 +
* Do monitor the system to ensure the contactor is working.
  
 
Some useful contactors and fuse links:
 
Some useful contactors and fuse links:

Revision as of 01:32, 20 September 2009

Using three phase AC synchronous Ford traction motor and SKAI with the following specifications :

  • Type 1PV5 133
  • F8Y8 148280 AC
  • 4W S20 WII
  • Th CI, F Rated battery voltage 250V
  • Made by Siemens in Germany
  • N515 0133 12
  • KRX Antrib Asynchron
  • RPM: 3500-9700
  • Operating voltage 215 - 380Volt - 282 Amp (RMS 400 peak)
  • 67Kw peak ( 30Kw continuous)
  • SKAI3001G12

Good explanation of contactors and precharge circuit: http://liionbms.com/php/precharge.php

A poor discussion on the subject: http://www.diyelectriccar.com/forums/showthread.php/gigavac-contactor-faultyi-23236.html Off the top of my head, it is suggested that these rules be broken at various points in the discussion

  • Do use the correct suppression system for your contactor -- make sure it turns on and off fast enough, make sure not to blow up the circuit driving the contactor
  • Do use a precharge resistor capable of continuous operation
  • Don't apply power to the controller all the time through the precharge resistor
  • Do use an appropriately rated precharge contactor
  • Do monitor the system to ensure the contactor is working.

Some useful contactors and fuse links:




-- Main.PhilipCourt - 18 Sep 2009