Difference between revisions of "Shire Electrical Conversion"

From Saker
Jump to navigationJump to search
(Imported from TWiki by twiki2mediawiki.py)
(Fixed Encoder info)
 
(6 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
Using three phase AC synchronous Ford traction motor and SKAI with the following specifications :
 
Using three phase AC synchronous Ford traction motor and SKAI with the following specifications :
* Type 1PV5 133
+
* Type 1PV5133 (some great pictures of this motor here: http://etischer.com/awdev/motor.html, and on http://en.wikipedia.org/wiki/File:SIEMENS_FORD-RANGER_EV_MOTOR_0.jpg wikipedia)
 
* F8Y8 148280 AC
 
* F8Y8 148280 AC
 
* 4W S20 WII
 
* 4W S20 WII
Line 11: Line 11:
 
* 67Kw peak ( 30Kw continuous)
 
* 67Kw peak ( 30Kw continuous)
 
* SKAI3001G12
 
* SKAI3001G12
 +
This page (http://www.commoditiesrecoverycorp.com/electricmotors.htm) says they are 6 pole.
 +
 +
Might have the following temp sensor (to be confirmed): KTY 84 - 13
 +
 +
Ed's estimates (16MHz temperature data on digital line PC8):
 +
* 440Hz = 30 deg C
 +
* 250Hz = 220 deg C
 +
* 200Hz = 290 deg C
 +
* TODO - calibrate and test!
 +
=== Encoder ===
 +
Acquired pinout:
 +
[[File:FordEncoderPlug.png]]
 +
 +
The wire colours are correct, but it seems at some point the second thermistor was removed, along with pin 5, which changed all the pins. As we have no matching plug, pin numbers are irrelevant.
 +
* Pin  Name  colour
 +
* 1    PTC+  BU
 +
* 2    PTC-  PK
 +
* 3    Ch_A  YE
 +
* 4    Ch_B  WH
 +
* 6    5-20V  GN
 +
* 7    0V    BN
 +
 +
Pack Voltage: 325V nominal
  
 
Good explanation of contactors and precharge circuit: http://liionbms.com/php/precharge.php
 
Good explanation of contactors and precharge circuit: http://liionbms.com/php/precharge.php
Line 20: Line 43:
 
* Do use an appropriately rated precharge contactor
 
* Do use an appropriately rated precharge contactor
 
* Do monitor the system to ensure the contactor is working.
 
* Do monitor the system to ensure the contactor is working.
 
 
Some useful contactors and fuse links:
 
Some useful contactors and fuse links:
 
* http://www.evsource.com/tls_relays.php
 
* http://www.evsource.com/tls_relays.php
 
* http://www.gigavac.com/products/contactors/gigavac/index.htm - gigavac have a nice range of well packaged contactors (I think we we should standardise on using these within our systems - Philip)
 
* http://www.gigavac.com/products/contactors/gigavac/index.htm - gigavac have a nice range of well packaged contactors (I think we we should standardise on using these within our systems - Philip)
 
* [[High Voltage]]
 
* [[High Voltage]]
 
+
-- Main.PhilipCourt - 18 Sep 2009 -- Main.EdCheeseman - 11 Jul 2010
 
 
 
 
 
 
 
 
 
 
 
 
-- Main.PhilipCourt - 18 Sep 2009
 
 
 

Latest revision as of 00:08, 1 May 2012

Using three phase AC synchronous Ford traction motor and SKAI with the following specifications :

This page (http://www.commoditiesrecoverycorp.com/electricmotors.htm) says they are 6 pole.

Might have the following temp sensor (to be confirmed): KTY 84 - 13

Ed's estimates (16MHz temperature data on digital line PC8):

  • 440Hz = 30 deg C
  • 250Hz = 220 deg C
  • 200Hz = 290 deg C
  • TODO - calibrate and test!

Encoder

Acquired pinout: FordEncoderPlug.png

The wire colours are correct, but it seems at some point the second thermistor was removed, along with pin 5, which changed all the pins. As we have no matching plug, pin numbers are irrelevant.

  • Pin Name colour
  • 1 PTC+ BU
  • 2 PTC- PK
  • 3 Ch_A YE
  • 4 Ch_B WH
  • 6 5-20V GN
  • 7 0V BN

Pack Voltage: 325V nominal

Good explanation of contactors and precharge circuit: http://liionbms.com/php/precharge.php

A poor discussion on the subject: http://www.diyelectriccar.com/forums/showthread.php/gigavac-contactor-faultyi-23236.html Off the top of my head, it is suggested that these rules be broken at various points in the discussion

  • Do use the correct suppression system for your contactor -- make sure it turns on and off fast enough, make sure not to blow up the circuit driving the contactor
  • Do use a precharge resistor capable of continuous operation
  • Don't apply power to the controller all the time through the precharge resistor
  • Do use an appropriately rated precharge contactor
  • Do monitor the system to ensure the contactor is working.

Some useful contactors and fuse links:

-- Main.PhilipCourt - 18 Sep 2009 -- Main.EdCheeseman - 11 Jul 2010