Speedway
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Midget
- 250kW Semikron $NZ 10K
- Siemens AC Induction motor $NZ 10K
- Battery 20kWh A123 $NZ 20K (cost of charging $6)
- Engineering $NZ 10K
- Fast Charger (PFC75 40kW) $NZ 6000 (80% charge time 1 hr) 80A supply.
- Brusa galvanicly isolated $5000 (3.3kW) (100% normal charge 7 hrs)
- Fast Charger (PFC75 40kW) $NZ 6000 (20kWh pack 80% charge time 1 hr) 80A supply.
- Brusa galvanicly isolated $5000 (3.3kW) (20kWh pack 100% normal charge 7 hrs) [15A supply required]
TOTAL $NZ 50K + charger(s)
TQ
- 100kW Scott Drive $NZ 7500
- 25 laps ~= 6 minutes (requires ~10kWh pack)
- 20kWh Winstone 230 kg 142l, 300V 60Ah ($NZ 10K) (cost of charging $6) - slow charge only ( charge time to 80%, 1 hr to 100% fast charge, 3 hrs to 100% on trickle charge)
- 10kWh A123 110kg ($NZ 12K) (cost of charging $3) - fast charge (15 min fast charge)
- Fast Charger (PFC75 17kW) $NZ 6000 (20kWh pack 80% charge time 1 hr) [80A supply required].
- Brusa galvanicly isolated $5000 (3.3kW) (20kWh pack 100% normal charge 7 hrs) [15A supply required]
TOTAL $NZ 22K + charger(s)
Kiwi kidz
- ME1012 450A drive Kit 19kW peak (electricmotorsport.com)
- Winstone 5kWh (16 x 100Ah 48V) - 56kg ~15 minute runtime (cost of charging $1.50)
- 10k (one off), ~6.2K volume!) + + ~NZ1200 pc programming interface + $5K engineering time (NRC - red light dash + first time setup and install)
- Protech charger 4kW $2500? [15A supply required]
TOTAL $NZ16.2K (one off) + charger [volume price estimated to be $NZ 6.2K]
Speedway Bike
Targets (500 cc methanol powered):
- Power: 40 kW (54 hp)
- Torque: 50 Nm (37 ft lbs)
- Weight: 80 kg (frame = 40 kg, motor + exhaust etc = ~40kg)
- Volume: ?
Actual (with 2 inch wide 2 magnet row motor, rated 6000 RPM, peak 10,000 RPM):
- Power: 50 kW (67 hp)
- Torque: 80 Nm
- Weight: 85 kg (frame = 40 kg, motor + inverter + battery = ~45kg)
- Volume: ?
Electrical Specs:
Sevcon
http://www.electricmotorsport.com/store/ems_ev_parts_controllers_calibrators_sevcon_gen4prog.php
Controller:
- 330Vdc(nom) / 300Arms(3ph)
- liquid cooled (may not need active cooling for short bursts)
- 7.5kg
Battery:
- A123 cylindrical. 2.3Ah, 3.2V, 0.070kg, 70A 180Wcont - 2 minute run time.
- Option(1) 100cells (1p) - 320V, 18kWcont, 7kg (starter/junior pack) up to 30kW/10sec
- Option(2) 200cells (2p) - 320V, 36kWcont, 14kg (race pack) up to 60kW/10sec
Motor:
- 50kW over 5800-10000rpm
- 23 cm diameter, 16 cm long
- 19 kg
Power balance:
- 50kW mech
- Vdc 320V nom
- Idc - 180A
Weight
- Controller ~7kg
- Battery ~20kg, 150x150x750
- Motor ~19kg
- Total - should come out at around 45kg.
Summary:
- Due to Cell Voltage sag, peak available power will drop at higher motor RPMs.
- Motor slightly oversize
- Torque controller limited, power is battery limited
Advertised specs:
- 50kW(66hp) 10,000rpm Electric Motor drive
- 80Nm+ INSANE TORQUE!
- 1500Wh 330V Battery (designed for 2min race runtime)
- 15min Fast Charge