Difference between revisions of "Connectors And Cabling"
Jump to navigation
Jump to search
(Imported from TWiki by twiki2mediawiki.py) |
(Imported from TWiki by twiki2mediawiki.py) |
||
| Line 11: | Line 11: | ||
* [http://www.lappgroup.co.nz/downloads/2007.html#nz1 Lapp Kabel cables] (site also has many connectors) |
* [http://www.lappgroup.co.nz/downloads/2007.html#nz1 Lapp Kabel cables] (site also has many connectors) |
||
* [http://www.generalcable.co.nz/newzealand/Products/Energy/Welding.aspx General Cable NZ - welding cable] (includes 600/1000V EPR/VNR) |
* [http://www.generalcable.co.nz/newzealand/Products/Energy/Welding.aspx General Cable NZ - welding cable] (includes 600/1000V EPR/VNR) |
||
| + | |||
| + | Fuses: |
||
| + | * [[http://www.littelfuse.com/part/LA100P300-4TI.html][LA100P300-4TI] - LittelFuse 300A 750VDC |
||
-- Main.PhilipCourt - 22 Dec 2007 |
-- Main.PhilipCourt - 22 Dec 2007 |
||
Revision as of 09:14, 17 July 2008
Emergency Disconnect Switch: The EVI200 system is supplied with main contactors. It's unclear if any additional equipment is required for emergency disconnection. Anderson disconnects or circuit breakers should be used when performing maintenance.
- Gigavac GX12 - a contactor that can almost do the job from the specs (gigavac have said that it will do the job via email).
- LEV200 - a contactor that will do the job according to specs
Connectors:
- http://www.andersonpower.com/products/multipole-sbe.html (700 amp connector will be needed for charging and inter pack connections - only rated at 150v(!), but tested to 1300v)
- http://www.multi-contact-usa.com (many different high current and voltage connectors)
Cabling:
- Lapp Kabel cables (site also has many connectors)
- General Cable NZ - welding cable (includes 600/1000V EPR/VNR)
Fuses:
- [[1][LA100P300-4TI] - LittelFuse 300A 750VDC
-- Main.PhilipCourt - 22 Dec 2007