Difference between revisions of "Connectors And Cabling"
Jump to navigation
Jump to search
(Imported from TWiki by twiki2mediawiki.py) |
(Imported from TWiki by twiki2mediawiki.py) |
||
| Line 13: | Line 13: | ||
Fuses: |
Fuses: |
||
| − | * |
+ | * [http://www.littelfuse.com/part/LA100P300-4TI.html LA100P300-4TI] - [http://www.littelfuse.com Littelfuse] 300A 750VDC |
| + | * [http://host1.publiquik.com/bussmann_web/family.cgi?familyUid=156 FWJ 1000V] - [http://www.bussmann.com/2/Products.html Bussman] 300A 800VDC |
||
-- Main.PhilipCourt - 22 Dec 2007 |
-- Main.PhilipCourt - 22 Dec 2007 |
||
Revision as of 10:31, 17 July 2008
Emergency Disconnect Switch: The EVI200 system is supplied with main contactors. It's unclear if any additional equipment is required for emergency disconnection. Anderson disconnects or circuit breakers should be used when performing maintenance.
- Gigavac GX12 - a contactor that can almost do the job from the specs (gigavac have said that it will do the job via email).
- LEV200 - a contactor that will do the job according to specs
Connectors:
- http://www.andersonpower.com/products/multipole-sbe.html (700 amp connector will be needed for charging and inter pack connections - only rated at 150v(!), but tested to 1300v)
- http://www.multi-contact-usa.com (many different high current and voltage connectors)
Cabling:
- Lapp Kabel cables (site also has many connectors)
- General Cable NZ - welding cable (includes 600/1000V EPR/VNR)
Fuses:
- LA100P300-4TI - Littelfuse 300A 750VDC
- FWJ 1000V - Bussman 300A 800VDC
-- Main.PhilipCourt - 22 Dec 2007