Difference between revisions of "Connectors And Cabling"
Jump to navigation
Jump to search
(Imported from TWiki by twiki2mediawiki.py) |
(Imported from TWiki by twiki2mediawiki.py) |
||
| Line 1: | Line 1: | ||
Emergency Disconnect Switch: |
Emergency Disconnect Switch: |
||
| + | The EVI200 system is supplied with main contactors. It's unclear if any additional equipment is required for emergency disconnection. Anderson disconnects or circuit breakers should be used when performing maintenance. |
||
| − | * [http://www.gigavac.com/products/contactors/datasheets/gx12/index.htm Gigavac GX12] |
+ | * [http://www.gigavac.com/products/contactors/datasheets/gx12/index.htm Gigavac GX12] - a contactor that can almost do the job. |
Connectors: |
Connectors: |
||
Revision as of 12:57, 22 June 2008
Emergency Disconnect Switch: The EVI200 system is supplied with main contactors. It's unclear if any additional equipment is required for emergency disconnection. Anderson disconnects or circuit breakers should be used when performing maintenance.
- Gigavac GX12 - a contactor that can almost do the job.
Connectors:
- http://www.andersonpower.com/products/multipole-sbe.html (700 amp connector will be needed for charging and inter pack connections - only rated at 150v(!), but tested to 1300v)
- http://www.multi-contact-usa.com (many different high current and voltage connectors)
Cabling:
- Lapp Kabel cables (site also has many connectors)
- General Cable NZ - welding cable (includes 600/1000V EPR/VNR)
-- Main.PhilipCourt - 22 Dec 2007