High Voltage

Emergency Disconnect Switch

The EVI200 system is supplied with main contactors. It's unclear if any additional equipment is required for emergency disconnection. Anderson disconnects or circuit breakers should be used when performing maintenance.

• Gigavac GX12 - a contactor that can almost do the job from the specs (gigavac have said that it will do the job via email).
• LEV200 - a contactor that will do the job according to specs

Connectors

• http://www.andersonpower.com/products/multipole-sbe.html (700 amp connector will be needed for charging and inter pack connections - only rated at 150v(!), but tested to 1300v)
• http://www.multi-contact-usa.com (many different high current and voltage connectors)

Cabling

• Lapp Kabel cables (site also has many connectors)
• General Cable NZ - welding cable (includes 600/1000V EPR/VNR)
• Wire size calculator at the bottom of the page
• Discusson of choosing the right wire size based on weight per saved volt

EVI200 Provided cabling

50^2mm pirelli nsgafoeu 1.8-3kV, approx 15mm outside diameter. http://www.nexans.de/eservice/navigation/NavigationFamily.nx?navigationId=183174 http://www.drakakabely.pl/images/stories/files/KatalogDatoveListyCZ/Pryzove/NSGAFOEU...pdf

Fuses

• LA100P300-4TI - Littelfuse 300A 750VDC
• FWJ 1000V - Bussman 300A 800VDC

Useful glossary of terms used in fuse specification sheets.