Difference between revisions of "NLG513- Sx Charger Notes"
Jump to navigation
Jump to search
(Imported from TWiki by twiki2mediawiki.py) |
(Imported from TWiki by twiki2mediawiki.py) |
||
| Line 1: | Line 1: | ||
Charger isssues: |
Charger isssues: |
||
| + | * Get "SDT Batt VoltHi" Error when traction battery not connected (see screen shot below). This is error is misleading. |
||
| − | * absolute maximum voltage limit (seems to be unrelated to the output voltage, could be the peak of the AC input voltage) |
||
| + | * Under the same conditions (traction battery not connected) the "Mains Voltage [V]" on the serial console in "Main Characteristics" mode displays a larger than expected voltage e.g. 337.6 V where it should be about 240V (see screen shot below) |
||
* current reported on the serial console (is different to the actual output current) |
* current reported on the serial console (is different to the actual output current) |
||
| + | Batt VoltHi Error: <br /> |
||
| − | Both of the above need to be reconfirmed and written up, as this is from memory from a few months ago. |
||
| + | [[Image:NLG513_monitor_errors_-_Batt_Volt_High.png|NLG513_monitor_errors_-_Batt_Volt_High.png]] |
||
| + | |||
| + | High mains voltage reading: <br /> |
||
| + | [[Image:NLG513_monitor_compact_characteristics_-_High_mains_voltage.png|NLG513_monitor_compact_characteristics_-_High_mains_voltage.png]] |
||
| + | |||
| + | All of the above needs to be written up more precisely (in particular the conditions under which they occur), as this is from memory. |
||
The image in the manual showing COM port settings for the "monitor" terminal application is close to unreadable. Here is a better one. |
The image in the manual showing COM port settings for the "monitor" terminal application is close to unreadable. Here is a better one. |
||
| Line 9: | Line 16: | ||
* COM port settings for hyperterminal: <br /> |
* COM port settings for hyperterminal: <br /> |
||
[[Image:NLG513_monitor_COM_port_properties.png|NLG513_monitor_COM_port_properties.png]] |
[[Image:NLG513_monitor_COM_port_properties.png|NLG513_monitor_COM_port_properties.png]] |
||
| − | |||
Revision as of 09:21, 27 January 2009
Charger isssues:
- Get "SDT Batt VoltHi" Error when traction battery not connected (see screen shot below). This is error is misleading.
- Under the same conditions (traction battery not connected) the "Mains Voltage [V]" on the serial console in "Main Characteristics" mode displays a larger than expected voltage e.g. 337.6 V where it should be about 240V (see screen shot below)
- current reported on the serial console (is different to the actual output current)
Batt VoltHi Error:
High mains voltage reading:
All of the above needs to be written up more precisely (in particular the conditions under which they occur), as this is from memory.
The image in the manual showing COM port settings for the "monitor" terminal application is close to unreadable. Here is a better one.
- COM port settings for hyperterminal:
